Skip to main content

Access a Dell EMC 14G iDRAC Using the USB Console Interface

Deploying infrastructure over the years has exposed some pretty useful shortcuts. It’s tedious to program an iDRAC using the front LED. Sometimes, unconfigured network switches hold up the entire configuration process. This method will allow you to hook up a USB console cable and control your iDRAC directly, which can be a life saver and makes configuration and deployment much easier and without the need for a network connection.

  1. Connect your laptop to the USB Management Port on the front of the PowerEdge or VxRail.
  2. Wait for your laptop to install the appropriate drivers.
  3. The USB interface on your laptop will be assigned an IP address of 169.254.0.4.
  4. Open the browser of your choice.
  5. Browse to https://169.254.0.3, which is the IP address assigned to the iDRAC USB interface.
  6. Log into the iDRAC as root.

Read More

Dell EMC VxRail 4.5 Upgrade Process: The Aftermath

Part 1: Dell EMC VxRail 4.5 Upgrade Process: Before We Begin
Part 2: Dell EMC VxRail 4.5 Upgrade Process: Upgrading the Cluster
Part 3: Dell EMC VxRail 4.5 Upgrade Process: The Aftermath

In the final post in this 3-part series, we cover some of the things that need to be done post upgrade for a VxRail 4.5 cluster.

Cleanup Process After a Successful Upgrade

  1. Log into the vSphere Web Client.
  2. Navigate to Hosts and Clusters.
  3. Delete all snapshots from the VxRail Manager service VM.
    1. Right-click the VxRail Manager VM, select Snapshots > Delete All Snapshots.
  4. Delete all snapshots from the vCenter Server Appliance service VM.
    1. Right-click the vCenter Server Appliance VM, select Snapshots > Delete All Snapshots.
  5. Delete all snapshots from the Platform Services Controller service VM.
    1. Right-click the Platform Services Controller VM, select Snapshots > Delete All Snapshots.
  6. If changes were made to avoid vSAN timeout issues during the upgrade process, change the following Advanced System Setting when the upgrade is complete.
    1. Navigate to Hosts and Clusters.
    2. Select the first node in the cluster.
    3. Select Configure > System > Advanced System Settings.
    4. Locate the VSAN.ClomRepairDelay setting.
    5. Change the current value of

Read More

Dell EMC VxRail 4.5 Upgrade Process: Upgrading the Cluster

Part 1: Dell EMC VxRail 4.5 Upgrade Process: Before We Begin
Part 2: Dell EMC VxRail 4.5 Upgrade Process: Upgrading the Cluster
Part 3: Dell EMC VxRail 4.5 Upgrade Process: The Aftermath

In Part 2 of this 3-part series, we’ll cover the actual upgrade process for your 4.5 VxRail cluster and how to monitor that upgrade so you don’t end up pulling your hair out.

Upgrading the VxRail Cluster

Local Upgrade Process

The local upgrade process is preferred, because it stages the upgrade to the VxRail Manager before proceeding with the upgrade.

  1. Log into the VxRail Manager.
  2. Navigate to the CONFIG page, and click on the System tab.
  3. Click the Local Upgrade button.
  4. In the Open File dialog, navigate to the VxRail Composite Bundle previously downloaded and saved locally, and then click Open to upload it to the VxRail Manager.
  5. Once the upgrade is staged to the VxRail Manager, click on the Continue button to begin the upgrade.
  6. When prompted, enter the required credentials for the vCenter Server local administrator account, the VxRail Manager root account, the vCenter Server root account, and the Platform Services Controller root account, and click the Submit button.

Internet

Read More

Dell EMC VxRail 4.5 Upgrade Process: Before We Begin

Part 1: Dell EMC VxRail 4.5 Upgrade Process: Before We Begin
Part 2: Dell EMC VxRail 4.5 Upgrade Process: Upgrading the Cluster
Part 3: Dell EMC VxRail 4.5 Upgrade Process: The Aftermath

In Part 1 of this 3-part series, we’ll address what to do prior to kicking off an upgrade of your 4.5 VxRail cluster. There are a few “gotchas” I’ve run into in the past that I address here. Hopefully it’s helpful.

Generating the SolVe Upgrade Procedure

  1. Log into Dell EMC SolVe Online.
  2. Select All Products from the menu.
  3. Click the VxRail Appliance button.
  4. Click the Software Upgrade Procedures link.
  5. Select the model of the VxRail appliances being upgraded, and click the Next button.
  6. Select the VxRail software version currently installed on the VxRail appliances being upgraded, and scroll down.
  7. Select the VxRail software version targeted for installation on the VxRail appliances being upgraded, and click the Next button.
  8. Click the Generate button to generate an upgrade procedure.
  9. Save, open and read the procedure thoroughly once it has been generated.
  10. Download the VxRail Composite Bundle for the version of software targeted in the upgrade.

Before Upgrading the VxRail Cluster

  1. Log into the vCenter Server Appliance Management Interface using

Read More